Front-Plate

Write a comment

Manufactured by Kodak AG, Stuttgart, Germany
Retinette IA is engraved with uppercases
Model: c.1966. Type 044, later model produced between 1963-1966
All Retinette IA produced between 1959-1966
35 mm film Viewfinder camera
The type and manufacturing year by serial no. are as to Camerapedia
Lens: Schneider-Kreuznach Reomar, 45mm f/2.8 three elements,
Aperture: up to f/22, setting ring and scale on the lens-shutter barrel
Focus range: 1-10m +inf.
Focusing: front element focusing, gues the distance, also there are symbols for portrait, group and landscape on distance scale, w/DOF scale
Shutter: Prontor 300S, speeds: 1/30-1/300 +B setting : ring ans scale on the lens-shutter barrel
Cocking lever: rapid, also winds the film, double exposure prevention, on the right of the bottom plate
Shutter release: on the top plate, left, w/ cable release socket
Viewfinder: bright frame, w/ parallax correction frames
Frame counter: decreasing type, manual setting, window on right of the top plate
Re-wind knob: on the top plate, left
Re-wind release: a small knob, beside the cocking lever
Memory dial: coupled with the re-vind knob
Flash PC socket: on the front plate, all speeds with electronic flash, only 1/30 for bulbs
Self timer: lever on the lens-shutter barrel
Back cover: hinged, small opening buton on the bottom plate, left
Hot-shoe
Tripod screw 1/4''
Body: die cast aluminum alloy; Weight: 440g
Serial no. 428640 (on the hot-shoe)
More info: Camerapedia, in Sylvain Halgand collection, in Kodak Classics by Mischa Koning
+Original ever ready case

Manufactured by Kodak AG, Stuttgart, Germany
Retinette IA is engraved with uppercases
Model: c.1966. Type 044, later model produced between 1963-1966
All Retinette IA produced between 1959-1966
35 mm film Viewfinder camera
The type and manufacturing year by serial no. are as to Camerapedia
Lens: Schneider-Kreuznach Reomar, 45mm f/2.8 three elements,
Aperture: up to f/22, setting ring and scale on the lens-shutter barrel
Focus range: 1-10m +inf.
Focusing: front element focusing, gues the distance, also there are symbols for portrait, group and landscape on distance scale, w/DOF scale
Shutter: Prontor 300S, speeds: 1/30-1/300 +B setting : ring ans scale on the lens-shutter barrel
Cocking lever: rapid, also winds the film, double exposure prevention, on the right of the bottom plate
Shutter release: on the top plate, left, w/ cable release socket
Viewfinder: bright frame, w/ parallax correction frames
Frame counter: decreasing type, manual setting, window on right of the top plate
Re-wind knob: on the top plate, left
Re-wind release: a small knob, beside the cocking lever
Memory dial: coupled with the re-vind knob
Flash PC socket: on the front plate, all speeds with electronic flash, only 1/30 for bulbs
Self timer: lever on the lens-shutter barrel
Back cover: hinged, small opening buton on the bottom plate, left
Hot-shoe
Tripod screw 1/4''
Body: die cast aluminum alloy; Weight: 440g
Serial no. 428640 (on the hot-shoe)
More info: Camerapedia, in Sylvain Halgand collection, in Kodak Classics by Mischa Koning
+Original ever ready case

I took a look at the new 2012 Prius, and the front air dam has been re-designed. This provides room to install the front license plate without putting the plate right on the bumper. In the photo below, which has the license bracket attached on the bumper, it looks like the air dam is high enough to hold the plate, and the right and left sides of the air dam don't provide any cooling at all, so a plate to the left or right side wouldn't interfere with cooling. I read the California DMV regulations regarding the front plate, and see no problem with this whatsoever.

What I cannot figure out, however, is how to effectively affix the plate to the air dam. Does anyone have any ideas?

One thought I have may be to surround the plate edges with a soft plastic or foam material, and then run plastic-coated wire through the eyelets in plate, and basically wire-wrap them to the horizontal and vertical supports in the air dam. Or, I could drill vertical holes in the horizontal "fins" of the air dam, and wrap the wires through those holes. This would let me offset the plate to one side, which would allow better airflow.

All times are GMT -4. The time now is 02:40 PM.

Free vBulletin skins and Free Web Templates by TalkTemplate.

All content copyright the poster unless otherwise stated in a post\document.

Search Engine Friendly URLs by vBSEO 3.5.2

Greetings,
I have recently moved to NJ ( from GA) and NJ requires front plates . I need to purchase and install the front plate bracket/frame on my 2007 Murano

What kind of brackets can be installed on 2007 Murano ? Are they specific to the Murano or can buy generic ? I am not too fussy about chrome/etc and plastic would be more than good for me ( save on $$$)

Thanks in advance for the feedback/help

New Source: JusticeNewsFlash.com
02/22/2012 // WPB, FL , USA // Injury Lawyers News // Nicole Howley

Irvine, CA — Mountain bicycle handlebar stems by Shimano American Corporation are being recalled by Shimano, the U.S. Consumer Product Safety Commission (CPSC) and Health Canada for fall hazards the handlebar stems pose to consumers. The CPSC announced the recall, which includes the U.S. and Canada, on February 21, 2012.

The handlebar stems were recalled after discovering that the front plate of the stem to the stem body can be pulled out of the threads while the bike is being ridden, which can cause the rider to lose control and fall.

“This recall involves PRO Atherton direct mount bicycle handlebar stems with the model number PRSS0049 and supplied from October 2009 to November 2010. The stem consists of a metal alloy body and front plate and four alloy bolts. The stem body is black with red markings. It has the word ‘PRO’ in four places on the sides and the word ‘Atherton.’ The front plate is black and silver with the PRO logo in the center. The model number is located on the barcode sticker on the backside bottom of the packaging material. Stems with the following identification codes are being recalled: HH, HJ, HK, HL, IA, IC, ID, IE and IF. Some of these stems were outfitted with 18mm bolts instead of 21mm bolts. The identification code is located on the stem body where the handlebars are seated,” reported the CPSC.

Consumers are advised to take the bicycles with the handlebar stems to an authorized retailer to determine if the stem is involved in this recall.

For more information concerning the product recall, consumers can contact Shimano American Corporation at (800) 353-4719 between 8 a.m. and 5 p.m. PT Monday through Friday, or visit www.shimano.com.

Legal News Reporter: Nicole Howley-Legal news for product liability lawyers.

Media Information:

Address:
Phone: 561-247-1646
Url: West Palm Beach Personal Injury Lawyer News News Source: JusticeNewsFlash.com - Press Release Distribution

To take full advantage of Flickr, you should use a JavaScript-enabled browser and install the latest version of the Macromedia Flash Player.

keyboard shortcuts: ← previous photo → next photo L view in light box F favorite < scroll film strip left > scroll film strip right ? show all shortcuts

So here is where I am in real world time. I´ve just finished the graduation of the top. Here the problem was that some parts were to thin, so I can only try to make it as close as possible to the desired thickness and hopefully it´ll be "good enough"
The top I´´ve put upside down on the back and sides and with the small thumb planes and a scraper, I´m taking the plates down to the desired thickness, taking care that it´ll be thin enough all the way out towards the edge. On the photo you can see a Hacklinger guide which i use for checking the thickness while I work.
I can feel that this will be a fast build. I want to play......

I have a b5.5 sedan and I live in the beautiful state of NY so I am required to have this stupid front plate on my car. I want to move my plate to the bottom of the passenger side, but I cant find much to relocate this thing. I dont want to cover up the fog lights and I havent really seen anybody relocate their front plate before. Anybody have anything that they can add in to help me out?

Need to take off this hideous plate frame

I have a Acura 2.2cl and i got pulled over and a ticket for not having a front license plate, but when i see the same car on the road they dont have one ether..
help please !!!

That depends on what state you live in.

Here are two lists I found on a website: one is a list of states that require you to have both front and back license plates and the other is a list of states that only require back license plates.If you live in one of the states that only require back license plates then you don’t have to worry about it unless you travel around the country a lot.

These US States require a Front and Rear DMV License Plates:

Alaska, California, Colorado, Connecticut, District of Columbia, Hawaii, Idaho, Illinois, Iowa, Maine, Maryland, Massachusetts, Minnesota, Missouri, Montana, Nebraska, Nevada, New Hampshire, New Jersey, New York, North Dakota, Ohio, Oregon, Rhode Island, South Dakota, Texas, Utah, Vermont, Virginia, Washington, Wisconsin, Wyoming,

These US States only require a Rear DMV License Plate:
Alabama, Arizona, Arkansas, Delaware, Florida, Georgia, Indiana, Kansas, Kentucky, Louisiana, Michigan, Mississippi, New Mexico, North Carolina, Oklahoma, Pennsylvania, Puerto Rico, South Carolina, Tennessee, West Virginia,

it is different for every state. In California, the law states that you must display however many license plates that you receive in the mail. We get two, so legally we are required to have one in front and in back.

In the state of Texas all vehicles from Texas are required to have 2 license plates a front and back.

It’s a state law whether a front license plate is required or not, has nothing to do with the type of car.Check your specific state law.

You need to check the law in your state if it is the law requires it where you live then yes it needs a front plate if not its just personal preference

yeah it depends on the law of the state u live in here in California yeah it isError processing request

Since the front plate location on my si was not cute i decided to customize it to my liking. I used the oem plastic plate frame and turned it upside down and moved it over just a little bit closer to the ground =D I will show you guys a few pics of what it looks like. Let me know if you like it or not!

p.s.since zip ties kept breaking, some shoe strings off of my jordans helped make this possible

proper lighting

bad lighting at work!

February 22, 2012 at 3:22 AM by AHN ·

February 22, 2012 at 3:22 AM by AHN ·

Irvine, CA, United States – Shimano Recalls PRO Atherton Mountain Bike Handlebar Stems Due to Fall Hazard

WASHINGTON, D.C. – The U.S. Consumer Product Safety Commission and Health Canada, in cooperation with the firm named below, today announced a voluntary recall of the following consumer product. Consumers should stop using recalled products immediately unless otherwise instructed. It is illegal to resell or attempt to resell a recalled consumer product.

Name of Product: Mountain Bicycle Handlebar Stem

Units: 213 in the United States; 83 in Canada

Manufacturer: Post Moderne Corporation, Taiwan

Importer: Shimano American Corporation, Irvine, Calif.

Hazard: The bolts holding the front plate of the stem to the stem body can be pulled out of the threads while the bike is being ridden, causing the rider to lose control of the bike and fall.

Incidents/Injuries: Shimano has received one report of an incident in which the rider fell and received torso and arm injuries.

Description: This recall involves PRO Atherton direct mount bicycle handlebar stems with the model number PRSS0049 and supplied from October 2009 to November 2010. The stem consists of a metal alloy body and front plate and four alloy bolts. The stem body is black with red markings. It has the word “PRO” in four places on the sides and the word “Atherton.” The front plate is black and silver with the PRO logo in the center. The model number is located on the barcode sticker on the backside bottom of the packaging material. Stems with the following identification codes are being recalled: HH, HJ, HK, HL, IA, IC, ID, IE and IF. Some of these stems were outfitted with 18mm bolts instead of 21mm bolts. The identification code is located on the stem body where the handlebars are seated.

Sold at: REI, bicycle specialty stores and dealers nationwide from October 2009 to November 2010 for about $120.

Manufactured in: Taiwan

Remedy: Consumers should immediately stop using bicycles with PRO Atherton handlebar stems and take them to an authorized retailer to determine if the stem on their bike is subject to the recall. Authorized retailers will replace 18mm bolts with 21mm bolts free of charge.

Consumer Contact: For more information and to find an authorized retailer, contact Shimano American Corporation at (800) 353-4719 between 8 a.m. and 5 p.m. PT Monday through Friday, or visit the company’s website at www.shimano.com

Filed under National News · Tagged with

This is a discussion on oem front licence plate bracket within the Exterior & Appearance forums, part of the Tech & Modifying & General Repairs category; Does anyone know if there is an oem licence plate bracket? The pre drilled holes are too far apart to ...

02/22/2012 // WPB, FL , USA // Injury Lawyers News // Nicole Howley

Irvine, CA — Mountain bicycle handlebar stems by Shimano American Corporation are being recalled by Shimano, the U.S. Consumer Product Safety Commission (CPSC) and Health Canada for fall hazards the handlebar stems pose to consumers. The CPSC announced the recall, which includes the U.S. and Canada, on February 21, 2012.

The handlebar stems were recalled after discovering that the front plate of the stem to the stem body can be pulled out of the threads while the bike is being ridden, which can cause the rider to lose control and fall.

“This recall involves PRO Atherton direct mount bicycle handlebar stems with the model number PRSS0049 and supplied from October 2009 to November 2010. The stem consists of a metal alloy body and front plate and four alloy bolts. The stem body is black with red markings. It has the word ‘PRO’ in four places on the sides and the word ‘Atherton.’ The front plate is black and silver with the PRO logo in the center. The model number is located on the barcode sticker on the backside bottom of the packaging material. Stems with the following identification codes are being recalled: HH, HJ, HK, HL, IA, IC, ID, IE and IF. Some of these stems were outfitted with 18mm bolts instead of 21mm bolts. The identification code is located on the stem body where the handlebars are seated,” reported the CPSC.

Consumers are advised to take the bicycles with the handlebar stems to an authorized retailer to determine if the stem is involved in this recall.

For more information concerning the product recall, consumers can contact Shimano American Corporation at (800) 353-4719 between 8 a.m. and 5 p.m. PT Monday through Friday, or visit www.shimano.com.

Legal News Reporter: Nicole Howley-Legal news for product liability lawyers.

Media Information:

Address:
Phone: 561-247-1646
Url: West Palm Beach Personal Injury Lawyer News

Garage clean out....of unimpressive items

Stone white fuel door 35 shipped

Challenger grill emblem 20 shipped

Front plate holder 15 shipped

Oem shift plate cover 15 shipped

Will try to upload photos as AP not allowing me to

Prefer local in Chicago area... Local pick up price for all three is 50 bucks..I don't have PayPal so if ship we will work it out..

As I said an unimpressive sale...prices are my best guess so if I am off am sure the peanut gallery with voice their say

Sent from the outskirts of the windy city....

Irvine, CA, United States – Shimano Recalls PRO Atherton Mountain Bike Handlebar Stems Due to Fall Hazard

WASHINGTON, D.C. – The U.S. Consumer Product Safety Commission and Health Canada, in cooperation with the firm named below, today announced a voluntary recall of the following consumer product. Consumers should stop using recalled products immediately unless otherwise instructed. It is illegal to resell or attempt to resell a recalled consumer product.

Name of Product: Mountain Bicycle Handlebar Stem

Units: 213 in the United States; 83 in Canada

Manufacturer: Post Moderne Corporation, Taiwan

Importer: Shimano American Corporation, Irvine, Calif.

Hazard: The bolts holding the front plate of the stem to the stem body can be pulled out of the threads while the bike is being ridden, causing the rider to lose control of the bike and fall.

Incidents/Injuries: Shimano has received one report of an incident in which the rider fell and received torso and arm injuries.

Description: This recall involves PRO Atherton direct mount bicycle handlebar stems with the model number PRSS0049 and supplied from October 2009 to November 2010. The stem consists of a metal alloy body and front plate and four alloy bolts. The stem body is black with red markings. It has the word “PRO” in four places on the sides and the word “Atherton.” The front plate is black and silver with the PRO logo in the center. The model number is located on the barcode sticker on the backside bottom of the packaging material. Stems with the following identification codes are being recalled: HH, HJ, HK, HL, IA, IC, ID, IE and IF. Some of these stems were outfitted with 18mm bolts instead of 21mm bolts. The identification code is located on the stem body where the handlebars are seated.

Sold at: REI, bicycle specialty stores and dealers nationwide from October 2009 to November 2010 for about $120.

Manufactured in: Taiwan

Remedy: Consumers should immediately stop using bicycles with PRO Atherton handlebar stems and take them to an authorized retailer to determine if the stem on their bike is subject to the recall. Authorized retailers will replace 18mm bolts with 21mm bolts free of charge.

Consumer Contact: For more information and to find an authorized retailer, contact Shimano American Corporation at (800) 353-4719 between 8 a.m. and 5 p.m. PT Monday through Friday, or visit the company’s website at www.shimano.com

About the Author:TheCyberShocker

Just an average guy, who has an interest in coding, and customizing websites. Love to help people with any problem, I'll try the best I can to help out.

Cardone 13-2530 new (select) master cylinder price sale. Testing which in turn exposes seals to successfully extreme temp changes if you want to ensure reliability with the harsh ‘underhood environment’. When you individual a Nissan 350Z and really don’t like to keep holes rrnside your front last part alternatively fascia of select to mount your front license plate , then this excellent kit was developed for you!

This kit installs where the factory tow-hook is in fact resides and screws with regard to shortly after removing the put regarding your factory fascia.

It’s as quick & simple remove for the reason that it is actually to successfully install , so that it is excellent for suggests & more situations where having a front plate definitely wouldn’t look right. Quick and system and removal. It incorporates an upgraded plastic screw-on filler cap which protects the fluid contained in the 1.4 ounce reservoir , and is defined as included in mutliple bore sizes.Specifications:* Master Cylinder Bore Size:Â 0.875 in.* Master Cylinder Stroke: 1.40 in.* Mounting Hole Quantity: 2 holes* Mounting Flange Center to Center: 2.25 in.* Outlet Fitting Size: 3/8-24 in. Cardone 13-2530 Recent (Select) Master Cylinder Price Sale.
::Includes virtually all hardware and instructions.

Not recommended to get consumed needed for brake connection repairs. Aluminum casting systems meant to exact tolerances for proper fit and function. Installs in minutes Genuine Stillen product. Cardone 13-2530 Completely new (Select) Master Cylinder Price Sale. Ultra-smooth cylinder bore finish ensures longer service life. 10 Pack of 3/16 Brass Compression Unions for joining steel lines. Castings protected through process of anodized coating to resist rust and corrosion. Quality the fact that meets or exceeds OE match up with , form and function.

New (Select) Master Cylinder. Well structured inner hose type reduces spongy pedal feel. This method ensures the best fit in every time. Cardone 13-2530 Completely different (Select) Master Cylinder Rate Sale. Technically advanced equipment ensure safe and reliable braking.

Brake hoses having banjo closing stages fittings normally include modern copper washers to successfully ensure proper sealing. CENTRIC BRAKE HOSE — Manufactured About the Highest Outstanding Standards To Meet Or perhaps a Exceed OEM Specifications To have Big Lasting Service And That may Be A Direct Replacement Of one’s Actual Hose Pertaining to Painless Not any Hassle ReplacementLocation: Front Departed from Superior Resistance to help abrasion and corrosion. Integral brackets , if applicable are typically added to ensure proper fit and easy training installation. PG Plus hydraulic brake master cylinders apply aluminum and iron castings to get exact match in to the design on the vehicle’s original equipment. Exceptionally smooth bore that minimizes wear caused by way of every brake stroke resulting in prolonged service life. Cardone 13-2530 Modern (Select) Master Cylinder Pricing Sale.

Cardone 13-2530 New (Select) Master Cylinder Price Sale. Direct change hydraulic brake hose is use specific. New hose replacement foam is encouraged as part of complete brake repair with regards to your vehicle. Testing who exposes seals to extreme temperature changes to help you ensure reliability inside the harsh underhood environment. Quality that meets or exceeds OE fit , form and function. Cardone 13-2530 Terrific new (Select) Master Cylinder Price range all the way Sale. Appropriate metals included in construction that will keep chemical reactions which might lead to corrosion and early failure.

Â Wilwood #260-1304 Master Cylinder , Aluminum , Natural , Â .750 in.Â Bore , Universal , Each.Â Description:This popular lightweight , stream-lined theme is usually pre-owned in support of clutch and small master cylinder requirements but is well known with respect to its just dependability. Exceptionally sleek bore that minimizes wear caused by all brake stroke resulting throughout longer support life. Castings match original exercise equipment make by way of aluminum used that appropriate , to make sure that reduced weight may not stress the brake increaser mounting. With PG And premium products , you can easlily often be certain that your alternative brakes perform as high quality as all of your one of a kind equipment . Using cutting edge plastic reservoirs stops contamination and results inside the leak-free seal. CENTRIC BRAKE HOSE — Manufactured To Highest Quality Standards To assist you to Meet Or perhaps even Exceed OEM Specifications For Long Lasting Specialist And Which are designed to Be A Send Replacing Of a Original Hose For Not hard Certainly no Hassle ReplacementLocation: Rear Superior Resistance to abrasion and corrosion.

Castings protected by simply anodized coating to make sure you resist rust and corrosion. Well structured inner hose structure reduces spongy pedal feel. Cardone 13-2530 New (Select) Master Cylinder Final price Sale. All the brake hoses are unquestionably tested approximately 4 , 000 pounds per square inch to ensure safety standards will most certainly be met. Interchanges: 62B , 62-3 , 162300 , 62X3. 13-2530 Great new (Select) Master Cylinder. Aluminum casting units produced to exact tolerances regarding appropriate accommodate and function. Includes all nessessary gardening and instructions.

Direct replacement hydraulic brake hoses are that’ll accommodate specific vehicle products and positions. High-quality construction ensures strength , chemical and thermal resistance to get more time life. Cardone 13-2530 Unique (Select) Master Cylinder Charge tag Sale.

Tags: Cardone 13-2530 New, Cardone 13-2530 New (Select), Cardone 13-2530 New (Select) Master

This entry was posted on Monday, February 20th, 2012 at 8:34 pm and is filed under Internet Shopping, Value Comparison And Find Most Affordable Prices. You can follow any responses to this entry through the RSS 2.0 feed. You can leave a response, or trackback from your own site.

Posted by admin at 3:33 AM. Placed in Game Raiders category

the real war gaming battleground Europe Red States and union of dozens of tanks are in the ground roll beings, domineering over the strong. Despite having almost invincible armor, reach the acme of perfection of the moving speed and powerful to no solution of the attack force. However, such a powerful weapon still can be high-end anti-tank rifleman kill. Today we will show, the red country anti-tank rifleman to restraint blue country various types of tanks and armored vehicles.

aiming mirror blue country DMKI armored reconnaissance vehicle

www.mmo5.net

battleground Europe blue country DMKI armored reconnaissance vehicle is blue country of tank and armored car inside the thin armor. Therefore, if the red country anti-tank rifleman face blue country DMKI armored reconnaissance vehicle, aiming at positive observation window area, shooting, will be the winner.

blue country 13 mm miniature tank struck

www.mmo5.net

battleground Europe red country anti-tank rifleman facing the incoming blue country 13 mm miniature tank, if on the left side, the surface quasi left from before the second wheels of partial posterior position, as well as the body back plate middle forebrain regions, can easily kill. If on the right, it should aim at the right side of the plate body about 1\/3 at the junction, as well as the body part of the connecting pipe. If a frontal attack blue country 13 mm miniature tank, was aimed at the lower part of the front side tanks from the shooter perspective center-right region.

www.mmo5.net

Destroy blue country 40 mm light tank

www.mmo5.net

battleground Europe red country anti-tank rifleman, in blue in 40 mm light tanks left on the attack, need to aim at former number second wheels vehicle position above the left plate body, and the middle rear junction. When at its right side attack, need to aim at the right side of body steel plate, the middle partial rear junction. If the front face of a 40 mm light blueTank, then aiming at the front viewing port area, as well as from the shooting angle observation mouth right front plate in the middle region. If aimed at the correct and accurate shooting, can easily destroy it.

www.mmo5.net

brave to face the enemy, passion battlefield battleground Europe , all the officers and men using hundreds of real weapons, realizing the myriads of changes kill. However destroy tanks by means of natural is not only recently introduced the several. Join today battleground Europe achieve belongs to you, the most imaginative splendid kill!

battleground Europe website: www.pkhlk.com

battleground Europe account registration: http://register.pkhlk.com

battleground Europe client download: http://downloads.pkhlk.com

battleground Europe official forum: http://bbs.pkhlk.com

Got a new bumper installed in your car but do not want to drill holes for the front license plate? The solution to your problem is a tow hook license plate holder. Now you can mount your front license plate without having to drill holes in your beautiful bumper cover.

In many states and countries, many cars are not required to display license plate on the front. Because of this, they come out of the factory without the need for front license plate. However, these days a lot of states are requiring car owners to display their front license plate. Some car owners hate to see bumper holes for mounting the front license plate. If drilling holes to your brand new bumper is a big deal to you, then you may want to go with a nice kit to hold your front license plate without drilling holes in your expensive bumper cover.

You can keep your BMW street legal without having to drill holes in the bumper to display the front license plate. You can use the front license plate tow hook mounting kit that adapts your front tow hook. All the parts of the tow hook license plate holder are made of stainless steel and powder coated to stand up to daily driving conditions. It is a great product for your car.

Tow Hook License Plate Holder

Installing the tow hook license plate holder is quick and easy. The kit includes all the things you need and you do need special tools to complete the installation. Simply remove the cover on the front tow hook mounting port and install the tow hook adapter bolt with a wrench. Then install the bracket where you screw the license plate. The tow hook license plate holder is height adjustable and you can get the kit in straight or angled type.

Are you participating in show or track events and don’t need license plate displayed? No problem. You can simply remove your license plate anytime you do not need it. It’s that easy.

If you have an expensive bumper, the last thing that you want to do is to bore holes in it. Now you don’t have to worry about having your beautiful bumper cover ruined by holes just to display that front license plate. With front plate tow hook license plate holder, you can display your front license plate and keep your expensive bumper in flawless condition.

Looking for nice upgrade option for your car? CLICK HERE <== to find out more. Follow our easy upgrade guide and your car will look better by next week (and all of your friends will be stunned at the difference).

		6speedonline.com Forums > Porsche (Present) > 997 Turbo / GT2

New! Use your Facebook to securely log into this site, click logo to login

997 Turbo / GT2 2004–present Turbo discussion on the current model Porsche 911 Twin Turbo.
Sponsored By SharkWerks, Inc

Welcome to 6SpeedOnline.com!

Welcome to 6SpeedOnline.com.

You are currently viewing our forum as a guest, which gives you limited access to view most discussions and access our other features. By joining our community, at no cost, you will have access to post topics, communicate privately with other members (PM), respond to polls, upload content and access many other special features. Registration is free, fast and simple, join 6SpeedOnline.com today!

Yesterday, 08:31 PM

#1

Registered User

Garage is empty, add now

Join Date: Jul 2008

Location: O.C.

Posts: 2,938

Rep Power: 293

bonehead has a reputation beyond repute

CMS front spoiler skid plate fix?

I already PM'd Tom@CMS about this but thought I'd get some input from everyone.

I have the carbon fiber front spoiler, and as some may know, it has a metal skid plate bolted on(?) the undersurface to protect from scraping. Well, its done a magnificent job but seems to have reached its limit today. Coming out of a steep parking lot, the skid plate on the passenger side came loose and is hanging by a single bolt towards the center of the spoiler.

Would an adhesive such as loctite work? If so, which one? I'm wary of having the plate rebolted to the spoiler b/c one, it already failed once, and two, I'm wary of drilling new holes into something that can splinter into a million expensive bits.

Thoughts/ideas?

__________________
2007 997 TT Schwarz/Schwarz, 3rd pedal EVOMS 775

2011 Subaru WRX STi sedan, DGM, bone stock

Yesterday, 10:16 PM

#2

Registered User

Garage is empty, add now

Join Date: Feb 2010

Location: Temecula, Ca

Posts: 983

Rep Power: 62

skeeter has a reputation beyond repute

Quote:

Originally Posted by bonehead

I already PM'd Tom@CMS about this but thought I'd get some input from everyone.

I have the carbon fiber front spoiler, and as some may know, it has a metal skid plate bolted on(?) the undersurface to protect from scraping. Well, its done a magnificent job but seems to have reached its limit today. Coming out of a steep parking lot, the skid plate on the passenger side came loose and is hanging by a single bolt towards the center of the spoiler.

Would an adhesive such as loctite work? If so, which one? I'm wary of having the plate rebolted to the spoiler b/c one, it already failed once, and two, I'm wary of drilling new holes into something that can splinter into a million expensive bits.

Thoughts/ideas?

Learn to drive! That is all!

__________________
Switzer e911 flexfuel in the works!!

Last edited by VID997; Today at 12:17 AM.

Yesterday, 11:41 PM

#3

Registered User

Garage is empty, add now

Join Date: Mar 2010

Location: San Jose, CA

Posts: 744

Rep Power: 60

VID997 has a reputation beyond repute

Ed,

My skid plates are riveted on. I too wore through one of the rivets, the one closest to the center front, on the drivers side of the car. I just removed the rest of the rivet and use a flat body panel washer/nut in conjunction with a .25-.375" automotive sheet metal screw with a flat philips button head. Its been working just fine thus far. However, my plates are getting a bit thin and could stand to be replaced.

__________________

Perfect Turbo

Today, 12:15 AM

#4

Registered User

Garage is empty, add now

Join Date: Mar 2010

Location: San Jose, CA

Posts: 744

Rep Power: 60

VID997 has a reputation beyond repute

Quick pic of the fix. Just make sure you use a short screw, else it will poke through the visible side of your spoiler and you'll really be p-ss'd off at yourself!

Today, 12:15 AM

« Previous Thread | Next Thread »

Thread Tools	Search this Thread
Show Printable Version Email this Page
Display Modes	Rate This Thread
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Posting Rules
You may not post new threads You may not post replies You may not post attachments You may not edit your posts HTML code is On

Front-Plate

Tuesday, February 28, 2012

Front plate for a mid-1960′s Cub Cadet Riding Mower. Fits on front ...

Write a comment

Kodak Retinette IA (2) | Flickr - Photo Sharing!

Kodak Retinette IA (2) | Flickr - Photo Sharing!

Monday, February 27, 2012

2012 Front License Plate Mod - PriusChat Forums

3000GT / Stealth / GTO - Wanted WTB: Front license plate bracket ...

Need a front help with license plate bracket/frame - Murano 2007 ...

Sunday, February 26, 2012

PRO Atherton Mountain Bike Handlebar Stems by Shimano ...

#1419 front plate: Hello, JR | Flickr - Photo Sharing!

News From The Workshop: graduating the front plate of the fiddle

Front License Plate Relocating?

Friday, February 24, 2012

Does an acura 2.2 cl need a front license plate? | Auto Symbol

Thursday, February 23, 2012

Custom front plate relocator - 8th Generation Honda Civic Forum

Wednesday, February 22, 2012

Shimano Recalls PRO Atherton Mountain Bike Handlebar Stems ...

oem front licence plate bracket

PRO Atherton Mountain Bike Handlebar Stems by Shimano ...

Painted fuel door, challenger grill emblem, front plate holder FS ...

Shimano Recalls PRO Atherton Mountain Bike Handlebar Stems ...

Tuesday, February 21, 2012

Teye-Brand of Gypsys-Turquoise La Mora | Rebel Guitars

Deadfront Terminology Question - InspectionNews - Home Inspection

PLYMOUTH FURY 1966 RH FRONT BRAKE PLATE W ...

About the Author:TheCyberShocker

Monday, February 20, 2012

Cardone 13-2530 New (Select) Master Cylinder ... - newsource15.com

Aimed at a mirror without living battleground Europe anti-tank final ...

Sunday, February 19, 2012

Keep Your Beautiful Bumper Cover Flawless With Tow Hook ...

CMS front spoiler skid plate fix? - 6speedonline.com Forums

Search This Blog

Popular Posts

Followers

Blog Archive